ARDROX AV30 (20L) - Penetrating, Water Displacing, Long-Term Corrosion Inhibiting Compound

ARDROX AV30 (20L) – Penetrating, Water Displacing, Long-Term Corrosion Inhibiting Compound

Chemetall Ardrox® water displacing corrosion inhibitor forms almost tack-free, waxy film, which easily penetrates to provide excellent corrosion inhibiting characteristics. This liquid inhibitor is light brown in color. It allows for easy application by dipping, brushing or spraying. This hydrocarbon-like odored inhibitor has a coverage capacity of 17 square meters per liter. It has boiling temperature range of 155 to 200 degrees C. The corrosion inhibitor has a flash point of 46 degrees C, making it safe for use. It can be stored at temperature range of 40 to 85 degrees F. It is suitable for use on painted and unpainted surfaces of airframe structures.

Add to Wishlist

Compare

Category: Aerospace Chemical Consumables. Tags: Aerospace Chemical Consumables.

Description

Overview

AV 30 can be used in all areas of the airframe on painted and unpainted surfaces.

AV 30 is a versatile CIC product. It combines good penetration properties with excellent corrosion inhibiting characteristics at low applied film weight.

Movable parts should be masked before treatment unless spray application can be controlled to prevent direct contact. If AV 30 spray control or masking of movable components is not possible, then an alternative, soft waxy film CIC, such as AV 25 should be used.

When Quality is Non-Negotiable, choose ARDROX!!

FEATURES

Ensures excellent corrosion protection and maximum penetration capability, when spray application is recommended
Applied as a spray using ACS-System for airmix application equipment or AAS-System for airless application equipment
Relative density of 0.9 and a bulk density of 7.51 pounds per gallon
0.6% LEL, 7% UEL flammability limit

APPROVALS:

Boeing BMS 3-29
MIL-PRF-16173 Class I Grades 1 and 4
McDonnell Douglas: DMS 2150
Airbus: AIMS 09-08-002 Type II Grade 2
IPS 09-08-002-01
ECS-L 2287 Type II

APPLICATIONS:

AV 30 can be applied by dipping, brushing or spraying. For maximum penetration capability and the most effective corrosion inhibiting performance, spray application is recommended, however, brush application is effective when applying AV 30 to specific areas or components
AV 30 can be sprayed using either the specifically designed ACS – System (airmix application equipment), or the AAS – System (airless application equipment)